GDB-1 / Technical data sheet
GDB-1 spec sheet
Technical data for the GDB-1 telescopic rapid-deployment barrier, single unit: dimensions, design load case and anchorage factors of safety. Document GDB-TDS-001, Rev A, October 2026.
PDF · 1 page · 645 KB
Key figures
| Overall height | 917.35 mm |
|---|---|
| Base depth | 1216 mm |
| Apron (toe) length | 258 mm |
| Water-face sweep | R300 |
| Design retained height | 800 mm |
| Heat resistance | Up to 500 °C |
| Flow tested | 9–12 m³/s |
Anchorage and factor of safety
Factors of safety for a unit retaining 800 mm of water or fill, by toe-anchor fixing.
| Fixing | Length | Water | Fill |
|---|---|---|---|
| Type I | 450 mm | 2.0 | 1.5 |
| Type II | 900 mm* | 3.0 | 2.0 |
- Factors of safety are based on an 800 mm retained height of water or fill, and improve where the depth of water or debris is lower.
- * Type II anchors extend beyond 600 mm below ground. Locate in-ground services before fixing.
- All dimensions in millimetres. Do not scale from the sheet. Structural assessment by Seitech Ltd, Auckland.
- Full design information is available on request.
Need more detail?
Request full design information
Full design information and test documentation are available on request. Contact our team, or arrange a demonstration of the system.